RGX100970 - Suspension Bush – Watts Linkage – Outer C-Trigger Wheel splined to the gearbox input

splined to the gearbox input shaft and clamped between the flywheel and the clutch cover

so the lens stays visible and light output is not obstructed

This is the complete fuel tank assembly

Ignition Module Link Plug - a 3-to-2 pin adapter plug used with the V8 distributor ignition module

It should be renewed whenever the duct is separated from the supercharger

RGX100970 - Suspension Bush – Watts Linkage – Outer C-Trigger Wheel splined to the gearbox inputSuspension Bush the outer pivot bush for the rear Watts linkage transverse link. The Watts linkage locates the rear axle laterally while permitting full vertical suspension travel. This bush is fitted at the outer end of the transverse link, isolating the pivot between the link and its mounting and maintaining accurate lateral location of the axle. A worn bush allows lateral play in the axle, producing rear end wander and imprecise handling.