99498 - SKF Speedi-Sleeve - Max. Shaft Diameter 127.15mm 100x190x15hmsa10rg-skf The UC209is normal duty Bearing

The UC209is normal duty Bearing Insert with set screws and a 45mm inside diameter

This 23988CAME4 bearing is a Spherical Roller Bearing with a guide ring centred on a retaining flanged inner ring

This LJ1 2 R&M bearing is a Open Type Deep Groove Radial Ball Bearing with a standard radial internal clearance The bearing's dimensions are 1/2x1

619 11 2RS Ultra Light Thin Series 55mm - Bore Size Rubber Seals on Both Sides of the Bearings Normal Radial Internal Clearance

The INA equivalent is NK47/20-XL

99498 - SKF Speedi-Sleeve - Max. Shaft Diameter 127.15mm 100x190x15hmsa10rg-skf The UC209is normal duty BearingWhen wear and damage occur on a shaft, SKF Speedi Sleeves are the solution. In order to perform their function properly, shaft seals must be seated on a smooth, round shaft face. If the shaft face becomes worn the seal can no longer perform as necessary, and, over time, will allow contaminants to enter the component and cause further damage to both the shaft and the component. Simply replacing the seal will not repair the damage to the shaft and