Mounts in a standard 4 in × 4 in × 21⁄8 in junction box
Each HS-NCM can accommodate up to two node addresses
the Gamewell FCI ASD-PL3-IV smoke detectors are intelligent addressable detectors with point ID capability that enable each detector address to be set with rotary address switches providing exact device locations
FMM-1(A) is a standard-sized module (typically mounts to a 4″ [10
The sensor has two multicolored LEDs controlled by the panel to indicate sensor status
Gamewell FCI AMM-2 Mini Monitor Module TC811A1006 Mounts in a standard 4The Addressable Monitor Module AMM 2 features a single Style B, Class B initiating circuit with end of line resistor. This module provides an address for any device or group of devices connected to this circuit. Any alarm initiating devices with normally open (N. O.) dry contacts, such as heat detectors, linear heat detection devices, projected beam smoke detectors, 4 wire smoke detectors, water flow switches, tamper switches, manual stations, etc.